Programmed Fuel System Control Module 20827745 Plug & Play FSCM

  
Is Your GM Vehicle Stalling, Hesitating, or Refusing to Start? Nothing is more frustrating than a vehicle you can't rely on. If you're experiencing sudden engine stalls, rough idling, a no-start condition, or a persistent Check Engine Light, the problem often points directly to a failing Fuel System Control Module (FSCM). This critical component regulates the voltage sent to your fuel pump, and when it malfunctions, it starves your engine of the fuel it needs to run properly.

Don't let a faulty module leave you stranded. This is the definitive, hassle-free solution to restore your vehicle's performance and your confidence in it.

Common Symptoms of a Failing FSCM & Your Direct-Fit Solution. A bad FSCM can trigger a variety of confusing symptoms and diagnostic trouble codes (DTCs). If you've pulled codes like P069E, P0230, P0606, or U0109, you've found the culprit.

Engine cranks but will not start. Sudden stalling, especially under load. Hesitation or sputtering during acceleration. Reduced engine power and poor fuel economy.

A noticeable whine from the fuel pump. This replacement Fuel System Control Module is engineered to be the ultimate fix. This means it arrives at your door ready for a simple, plug-and-play installation, completely eliminating the need for an expensive and time-consuming visit to the dealership for programming. Pre-Programmed to Your VIN: Skip the dealership!

Restores Peak Performance: By delivering precise voltage to the fuel pump, this module corrects fuel pressure issues, leading to a smoother idle, responsive acceleration, and reliable starting every time. Guaranteed Compatibility: A direct replacement for part numbers 20827745, 20791901, 20877116, and 20850927, ensuring a perfect fit and seamless communication with your vehicle's computer. Engineered for Durability: Built to withstand the harsh on-vehicle environment, this module is rigorously tested to ensure long-lasting, dependable operation for miles to come. From over 20 years of hands-on diagnostics, I've seen countless fuel system issues.

A common mistake DIYers and even some shops make is installing an un-programmed module. It simply won't communicate with the vehicle's ECU, leaving you with the exact same no-start problem and a lot of wasted time. Our process of programming the Programmed Fuel System Control Module 20827745 to your specific VIN. We handle the technical part so you can get back on the road fast and with confidence. How does the programming process work?

Is this a true plug-and-play installation? Because we handle all the programming on our end, no further calibration or dealer-specific tools are required. Simply disconnect the old module, connect the new one, and your vehicle will be ready to go. Where is the FSCM located on my vehicle? On most GM trucks and large SUVs (like the Silverado, Tahoe, and Escalade), it's typically mounted to the driver's side frame rail, near the spare tire. On sedans and crossovers (like the LaCrosse or Acadia), it is often found in the trunk or rear compartment area. We always recommend consulting a service manual for your specific vehicle for the exact location.

Will this fix a P069E trouble code? The DTC P069E (Fuel Pump Control Module Commanded OFF) is one of the most common codes indicating a direct fault within the FSCM or its circuitry. Replacing the faulty module with this pre-programmed unit is the correct and definitive repair for this code.

What part numbers does this module replace? This module is a direct replacement for several OEM part numbers, including 20791901, 20827745, 20877116, and 20850927.

Using our Programmed Fuel System Control Module 20827745 ensures you get the right part the first time. What happens if I forget to provide my VIN? If you do not provide it during checkout, our customer service team will contact you promptly to retrieve the information and prevent any delays with your order. Category: Fuel Pump Control Module (FPCM). To program your module, we require your full 17-digit VIN.

Labor costs are not covered. 9131 Highway 71 NE Spicer, MN, 56288.